Several Precautions for Installing the Cleanroom Door in the Operating Room

1. The cleanroom door in the operating room should be a high-quality product

The cleanroom door in the operating room has a high technological content. However, the reliability of its mechanical equipment, automation equipment, or intelligent equipment varies greatly, so the price is also very different. In order to ensure that during the normal use, it is less faulty, durable, and safe, products from big brand manufacturers should be selected as much as possible.

When installing the skeleton of the cleanroom door in the operating room, please ensure that the entire skeleton is level, straight, strong, tight, and stable. The surface of the track should be flat and free of burrs.

2. The installation of the beam of the cleanroom door in the operating room

The upper beam device of the cleanroom door in the operating room is an important part in the installation process. The chassis equipped with mechanical equipment and electronic control equipment is fixed on it. Therefore, the beam and the connection between the beam and the hole side are required to have certain strength, rigidity, and stability.

If the previous construction drawings lack details, during the construction of the main structure, it is necessary to contact the designer to implement it without problems. The embedded parts connecting the two ends of the beam should be reliably anchored in the reinforced concrete members.

The cleanroom door in the operating room should be installed on the load-bearing wall or its attachment to ensure that the aluminum alloy track is level, straight, and strong after it is installed. When installing, pay attention to keeping it level, and ensuring the error is less than one millimeter. Because the beam is not level, there will be an uneven force when the door is moving, which will reduce the service life of clean room doors.

3. The device for the slot and track of the cleanroom door in the operating room

For the cleanroom door in the operating room equipped with a guiding lower track, it is advisable to draw a horizontal line during the construction of the floor, and accurately pre-embed the wooden slats under the track of the door. Pay attention to the length of trhe wooden slat is more than 2 times the width of the opening door. The method of post-grooving is not advisable, so as to ensure the quality of the slot and the beautiful junction between the lower track and the floor.

If the track of the cleanroom door in the operating room is installed on the welded iron dragon skeleton, the material for the overall skeleton of the door should use a square iron pipe with a wall thickness of several millimeters or more, or other materials with appropriate (or better) strength.

When purchasing cleanroom door in the operating room and devices, we should not only focus on the clean room door price, but also pay special attention so that the operating room door has the proper characteristics, which can isolate the environment on both sides of the door, such as noise, airflow, radiation, and can also ensure good air impermeability.

Dongguan Xinyi Door Industry Co., Ltd is a door manufacturer integrating R&D, design, manufacturing, sales, installation, and after-sales service. Our products include sliding automatic doors, swing automatic doors, automatic revolving doors, hospital automatic doors, retractable doors, and folding automatic doors. If you have any needs, please feel free to consult us.