Key Points and Analysis of Different Industrial Door Functions for Regular Maintenance

Focus on Regular Maintenance of Industrial Door

• Every three months, all screws including springs, hinges, and door panels of industrial doors must be re-tightened.

• Every three months, adjust the pulleys on the industrial door until they run flexibly in the tracks.

• When using industrial doors, always pay attention to the open and close limits. Once the travel changes, adjust it promptly to avoid burning out the motor.

• Check whether the noise generated during the motor operation of the industrial doors is normal. If an abnormality occurs, arrange for internal personnel from the industrial door manufacturer to handle the issue immediately.

• Pay attention to whether the high and low positions on both sides of the industrial door are level. If the door body is unbalanced, re-adjust it.

• Regularly oil and maintain the tracks, pulleys, springs, and anti-steel wire rope breakage device of the industrial doors to keep the doors operating smoothly and normally.

• Check the motor operation with an ammeter. Under normal circumstances, the current generated during the opening and closing of the industrial doors is roughly the same. If the opening current is significantly higher than the closing current, it indicates that the spring needs to be rewound until the opening and closing currents are roughly the same.

•  For industrial door motor maintenance, strictly do not disassemble or replace any components without following the instructions in the manual to avoid danger. If an abnormality occurs, contact the industrial door manufacturer immediately for assistance.

Types and functions of different industrial door

Industrial door is common components in all buildings, and their types and functions vary according to the actual needs of different factories. Let's talk about the types and functions of industrial doors:

Sliding door (translational or smooth door)

Sliding door is mostly used in traditional warehouses, which require left and right space. They are suitable for places with low usage frequency and sealing requirements.

Hinged door

Hinged door is mostly used in traditional warehouses with small door openings, low sealing requirements, low usage frequency, and low environmental requirements.

Roller shutter door

It is also known as the industrial rolling door, which is suitable for locations without insulation requirements and with low switching frequency. Although insulated roller shutter doors are now available, their structural features mean that their insulation is not too strong.

Industrial lifting door

This is a professional external door for industrial buildings and logistics construction, and is commonly used in the industry. Its various functions have gradually developed in the industrial and logistics environment, meeting the needs of insulation, sealing, high-frequency switching, service life, professional control, safety, etc.

Industrial rapid door

This is a more professional industrial door. Its high opening speed can reach 1.2 m/s (average speed), and the maximum instantaneous speed can reach 2m/s. It is mainly used in industrial buildings, and logistics garages can isolate airflow to ensure that the environment meets certain standards. At the same time, its high-speed and high-frequency start can ensure smooth operation.

Professional insulation door

This is a professional door used in situations with extreme temperatures, such as low-temperature cold storage doors and doors for high-temperature areas. These doors focus more on the insulation and sealing of the door body. So when you need to choose this kind of door, you must find a more professional and reliable industrial door supplier.

Other doors

Other professional doors include high-cleanliness seal door, high-cleanliness automatic door, etc.