The Selection and Use of Fast Roller Shutter Doors

Nowadays, fast roller shutter doors have been used in many places, providing great convenience for people's lives, so they are very popular among users. However, many users do not know how to choose when purchasing fast roller shutter doors. Let's talk about it based on our own experience. There are a few main points:

Ⅰ. The purchase considerations of fast roller shutter doors

1. Important and important considerations for the safety performance of fast roller shutter doors:

Safety performance refers to setting safety devices according to the situation on site. Safety is gradually accepted and valued by more and more users, especially with the increasing frequency of fast roller shutter doors in the process of goods circulation, various safety hazards also arise. Therefore, not only the basic use function of the fast roller shutter door, but also the safety protection device of the fast roller shutter door must be considered.

2. Consider the overall performance of the fast rolling door:

The overall performance means that the entire process should be considered when configuring the fast rolling door, and the model, quantity and control of the fast rolling door should be reasonably set. The fast rolling door is not just a simple switch accessory, its speed, airtightness, service life, safety, reliability, maintenance convenience, operating cost, noise impact, etc. are all factors to be considered.

3. Also consider the practicality of fast roller shutter doors:

The so-called practicality means that the fast roller shutter door must meet the actual needs. There are various models, specifications and functions of fast roller shutter doors, and the application range and price of each type of fast roller shutter doors are different. To configure from a practical point of view, it is necessary to consider both performance and investment savings for users.

These details cannot be ignored when purchasing a fast rolling door. The safety of anything is a priority. On this basis, it is better to consider the practicality of the fast rolling shutter according to your actual situation, and choose the one that suits you.

Ⅱ. What should be paid attention to when using fast roller shutter doors?

We all know clearly that in daily life, the maintenance and maintenance of the high speed rolling door is conducive to prolonging the service life of the high-speed rolling shutter door. In order to ensure the good operation of the fast roller shutter door and ensure the safety of use, the fast roller shutter door must be maintained and maintained in a planned way:

1. When using the fast rolling door, the surface of the rolling door should be kept fresh and dry, and the surface of the motor should be kept clean and free from other obstructions such as dust.

2. When cleaning the surface stains of the fast roller shutter door, you need to wipe it with a soft cotton cloth. When the stains are serious, you can choose a cleaning agent to quickly clean the surface of the fast roller shutter door, and then quickly dry it. Do not scrape hard with a hard tool, otherwise it will damage the surface of the fast roller shutter door.

3. During the operation of the fast roller shutter door, when the motor is overheated, the cause of the fault should be found out, and the fault should be eliminated before putting it into use. If an abnormality occurs, contact high speed roll up door manufacturers immediately for assistance.

4. The motor of the fast roller shutter door should be well lubricated during operation.

5. When the noise of the motor operation increases significantly during the operation of the fast roller shutter door, it is necessary to check the bearing to see if it needs to be replaced.